Greentech International (Zhangqiu) Co., Ltd.
Greentech Industry (Jinan) Co., Ltd.
Lithium-ion battery electrode manufacturing involves several precision processes, including slurry coating, electrode drying, rolling, and subsequent assembly preparation. After coating, positive and negative electrode materials must undergo controlled drying to remove residual moisture and volatile substances. Vacuum drying is particularly important because residual moisture can affect electrode quality and may create additional challenges during battery cell manufacturing.
In large-scale battery production facilities, multiple vacuum drying ovens may operate according to different production batches and drying schedules. A centralized vacuum system can help coordinate these units and simplify the distribution of vacuum capacity. The ZBK17 Roots vacuum pump can be integrated into such a system as a Roots booster stage, working together with a suitable backing pump to support the evacuation requirements of electrode drying equipment.
After the coating and preliminary drying processes, electrode rolls or sheets may be transferred into vacuum drying ovens for further moisture removal. Before the drying stage begins, the oven chamber must be evacuated to establish the required vacuum environment.
During initial evacuation, a relatively large quantity of air must be removed from the oven chamber and its connected pipelines. The ZBK17 Roots vacuum pump can work with a dry screw backing pump to support this evacuation process. The backing pump handles the initial exhaust, while the Roots pump provides additional pumping capacity as the system approaches its operating vacuum range.
This combination is useful for large drying chambers and production lines with frequent batch changes. The system configuration should consider the chamber volume, pipeline resistance, leakage conditions, and the required evacuation sequence.
During vacuum drying, moisture and other volatile substances are released from the electrode materials. These substances enter the vacuum system together with the extracted gas.
The vacuum equipment must therefore be arranged to handle both the gas load and the substances carried from the drying chamber. Depending on the electrode formulation and production process, the extracted stream may contain water vapor and residual organic solvent vapors.
A condenser can be installed in the vacuum pipeline to reduce the amount of condensable vapor entering the pumping equipment. Suitable filters and protective components can also be incorporated to prevent particles or other contaminants from reaching the pump.
The ZBK17 should not be treated as an independent deep-vacuum pump. In an electrode drying system, it is generally configured as a Roots booster operating together with a dry screw backing pump.
The dry screw pump provides the backing vacuum required for the Roots pump to operate within its suitable pressure range. The ZBK17 then increases the effective pumping capacity of the combined system, supporting the evacuation of larger drying chambers and connected pipelines.
The connection between the two pumps should include appropriate isolation valves, pressure monitoring points, and control arrangements. Interlocks can be used to coordinate pump startup and shutdown sequences, helping prevent operation outside the permitted conditions.
This configuration allows the vacuum system to be designed around the actual operating cycle of the drying ovens rather than treating each pump as an isolated piece of equipment.
The vacuum pipeline between the drying oven and the pumping unit should include suitable arrangements for vapor management and equipment protection.
A condenser can be installed to capture water vapor and condensable solvent components before they reach the pump. The collected liquid should be discharged through a suitable drainage arrangement and handled according to the plant's recovery or waste-management procedures.
Filters can be installed at appropriate locations to reduce the risk of dust, coating particles, or other contaminants entering the vacuum equipment. The filter arrangement should allow convenient inspection and maintenance without unnecessarily interrupting production.
The main vacuum pipeline should be designed to connect multiple drying ovens to the centralized pumping system. Branch pipelines can be equipped with isolation valves to allow individual ovens to be connected or disconnected according to their production schedules.
In large battery manufacturing facilities, several drying ovens may operate simultaneously or follow staggered production schedules. Their combined vacuum demand can change as different ovens enter initial evacuation, active drying, or holding stages.
The centralized system should therefore consider the operating sequence and vacuum requirements of each oven. The ZBK17 and its backing pump should be configured according to the combined load, while the main and branch pipelines should provide suitable connections for each chamber.
Isolation valves and control logic can support batch switching, allowing one oven to be disconnected for unloading or maintenance while other units continue operating. This arrangement can improve the flexibility of the vacuum supply system.
A centralized vacuum system can incorporate pressure sensors, temperature monitoring, valve feedback, and pump operating-status signals. These components help operators monitor the condition of the pumping system and coordinate the operation of different drying ovens.
Control logic can also be designed to manage the interaction between the Roots booster, backing pump, and oven isolation valves. This helps establish an organized operating sequence during chamber evacuation, drying, and system shutdown.
When the electrode drying process involves residual organic solvents, the composition and concentration of the extracted vapors must be evaluated before selecting the vacuum system configuration. Condensation, vapor recovery, sealing materials, and equipment compatibility should all be considered.
The condenser and associated liquid collection system should be designed according to the actual solvent characteristics and plant safety requirements. Where flammable solvent vapors may be present, the equipment arrangement, electrical components, ventilation, and protective measures must comply with the applicable safety standards.
The vacuum system should prevent excessive liquid, particles, and contaminants from entering the ZBK17 and its backing pump. Appropriate condensers, filters, drainage points, and isolation components are important for protecting the pumping equipment.
Maintenance access should also be considered during system layout. Filters, condensers, valves, and monitoring instruments should be positioned so that inspection and servicing can be performed without unnecessary disruption to the production line.
The vacuum drying of lithium-ion battery electrodes requires coordinated operation between drying ovens, pumping equipment, vapor treatment components, and centralized pipelines. The ZBK17 Roots vacuum pump can serve as a booster stage in a system configured with a dry screw backing pump, helping support the initial evacuation and ongoing vacuum requirements of large electrode drying chambers.
By integrating the Roots pump with condensers, filters, isolation valves, and coordinated control components, manufacturers can develop a vacuum system suited to multiple drying ovens and changing production batches. Careful consideration of vacuum load distribution, solvent vapor handling, equipment protection, and maintenance access helps establish a practical configuration for industrial battery electrode drying lines.

ZBK roots vacuum pump product information
Web: http://www.greentechblower.com (Group Web) ‖ http://www.zqblower.cn (Chinese) ‖ http://www.ringblower.cn/ (Ring blower) ‖ http://www.china-blower.com (Roots Blower) ‖ https://www.zibovacuumpump.com(Vacuum Pump)
Copyright © 2025 Greentech International (Zhangqiu) Co., Ltd. | All Rights Reserved 鲁ICP备12007127号 Technical support:Xintuweb
