How to Choose the Right 2BE3 Liquid Ring Vacuum Pump?

When choosing a 2BE3 liquid ring vacuum pump, many users first look at the pump size. However, bigger is not always better. The 2BE3 series covers models from 400 and 420 to 720, with different suction capacities, speeds, shaft powers, and motor powers. A proper selection should be based on the required vacuum level, suction capacity, and actual operating conditions.

1. First Determine the Required Suction Capacity

Suction capacity is one of the most important factors when selecting a 2BE3 liquid ring vacuum pump. According to the performance data provided, the 2BE3 series covers a wide range of suction capacities.

For example, the suction capacity of the 2BE3 400 is approximately 4,850–8,600 m³/h at different speeds. The 2BE3 500 provides approximately 8,700–15,500 m³/h, while the larger 2BE3 720 can reach 21,900–38,100 m³/h.

Therefore, if the system only requires a few thousand cubic meters per hour, there is no need to choose a large model. On the other hand, if the process requires more than 20,000 m³/h, a smaller model may not provide enough capacity.

During actual selection, determine the required gas flow rate under normal operating conditions and leave a reasonable performance margin instead of selecting a pump simply according to its maximum suction capacity.

2. Select the Model and Speed According to the Required Vacuum Level

In addition to suction capacity, the actual required vacuum level must also be considered. The limited vacuum of the 2BE3 series can reach 160 mbar absolute pressure, but the suction capacity changes at different operating speeds.

Generally, increasing the speed of the same model can increase suction capacity, but shaft power also increases significantly. For example, when the speed of the 2BE3 400 increases from 340 r/min to 610 r/min, its shaft power increases from 82 kW to 189 kW.

Therefore, selection should not only consider whether the pump can reach the required vacuum level. It is also important to determine how much suction capacity the pump can provide at the target vacuum level and how much power it will consume.

3. Motor Power Should Not Be Selected Based Only on Suction Capacity

Motor power directly affects equipment operating costs. Taking the 2BE3 520 as an example, its maximum shaft power ranges from approximately 172 to 412 kW under different operating conditions, with corresponding motor power ranging from approximately 200 to 500 kW.

If the motor power is too low, the pump may not operate reliably or continuously. If the motor is unnecessarily oversized, the initial investment and operating costs may increase.

Therefore, when selecting a 2BE3 vacuum pump, the motor should be matched according to the actual shaft power, operating speed, and working conditions rather than simply selecting a motor based on the pump model.

4. Consider Gas and Working Liquid Conditions

The 2BE3 liquid ring vacuum pump is commonly used in industrial vacuum systems, but gas conditions can vary significantly from one process to another. If the gas contains large amounts of water vapor, condensable components, dust, or corrosive substances, the pump materials, shaft seal, working liquid, and gas-liquid separator should be checked to ensure they are suitable for the application.

Working liquid temperature should also not be overlooked. The actual vacuum performance of a liquid ring vacuum pump can be affected by working liquid temperature. Therefore, for high-temperature applications, the pump performance should be evaluated according to the actual operating temperature.

5. Consider the Drive Method and Installation Requirements

The performance data shows that the 2BE3 400 and 420 are available with V-belt or gearbox drive options, while larger models such as the 500 and above mainly use gearbox drives. Different drive methods can affect installation, maintenance, and available space at the site.

In Greentech's industrial vacuum projects, 2BE3 selection is usually not based on a single parameter. Suction capacity, vacuum level, working liquid temperature, gas properties, drive method, and installation conditions are considered together. This helps avoid selecting equipment that is unnecessarily oversized or unable to meet the process requirements.

6. Summary of 2BE3 Liquid Ring Vacuum Pump Selection

In simple terms, selecting a 2BE3 liquid ring vacuum pump can be divided into several steps. First, determine the required suction capacity. Then confirm the working vacuum level, working liquid temperature, and gas properties. Finally, select the appropriate model based on shaft power, operating speed, motor power, drive method, and installation conditions.

For example, systems requiring high suction capacity can consider larger models such as the 2BE3 600, 620, 670, or 720. Applications with medium suction requirements can be evaluated using models such as the 2BE3 400, 420, 500, and 520.

The most suitable 2BE3 liquid ring vacuum pump is not necessarily the largest model. The right choice is the model that provides a reasonable balance between suction capacity, vacuum level, power consumption, and operating cost while meeting the actual process requirements.

vacuum pump product information

Web: http://www.greentechblower.com  (Group Web)  ‖  http://www.zqblower.cn  (Chinese)  ‖ http://www.ringblower.cn/ (Ring blower)  ‖  http://www.china-blower.com  (Roots Blower)  ‖  https://www.zibovacuumpump.com(Vacuum Pump)