2BV2061 Water Ring Vacuum Pump: Specifications and Selection Guide

What Is the 2BV2061 Water Ring Vacuum Pump?

Choosing a vacuum pump can feel confusing when you are looking at many models with different flow rates, vacuum levels, motor powers, and speeds. The 2BV2061 water ring vacuum pump is designed for small-flow industrial vacuum applications where stable vacuum performance and compact equipment are important.
The 2BV2061 vacuum pump has a suction capacity of 0.86 m³/min and can reach a limited vacuum of 1.5 mbar under suitable operating conditions. Its standard configuration uses a 2 kW motor and operates at 2880 r/min. With these specifications, it can be considered for small vacuum systems that do not require the large gas flow of bigger 2BV models.

2BV2061 Specifications at a Glance

Suction Capacity and Vacuum Level

The suction capacity of the 2BV2061 is 0.86 m³/min. In simple terms, this tells you how much gas the pump can remove over a certain period. It is one of the first numbers you should check when selecting a vacuum pump.
The limited vacuum is 1.5 mbar. This is a key parameter for applications that need a relatively deep vacuum. However, the actual vacuum reached during operation can change depending on gas temperature, working liquid temperature, liquid flow, system leakage, piping resistance, and other site conditions.

Motor Power and Pump Speed

The 2BV2061 uses a 2 kW motor and runs at 2880 r/min. A higher motor speed allows the pump to handle the required gas flow within a compact design, but speed alone does not determine the final vacuum performance.
When selecting the pump, it is better to look at suction capacity, required vacuum, motor power, and actual operating conditions together instead of choosing a model based on one specification.

Noise and Working Conditions

The noise level of the 2BV2061 is around 65 dB(A). For workshops and small industrial vacuum systems, this can be an important point when planning the equipment layout.
The water ring also plays an important role in pump operation. The temperature, cleanliness, and flow of the working liquid can directly affect vacuum performance and operating stability. Clean and properly controlled working liquid helps the pump work more consistently.

How to Select a 2BV2061 Vacuum Pump

Check Your Required Vacuum First

Before choosing a 2BV2061 water ring vacuum pump, determine the vacuum level your process actually needs. There is a big difference between a system that only needs moderate vacuum and one that needs to approach 1.5 mbar.
You should also consider whether the required vacuum is a continuous operating condition or only needed during a short part of the process.

Check the Required Gas Flow

Next, calculate the gas load of your system. The 0.86 m³/min capacity of the 2BV2061 makes it suitable for small-flow vacuum systems, but the actual required flow should be checked carefully.
If the system has frequent air leakage, a large amount of gas entering the process, or long and narrow vacuum piping, the pump may need to handle a higher gas load than expected.

Consider Working Liquid and Temperature

Water ring vacuum pumps depend on working liquid to form the sealing ring inside the pump. Working liquid temperature is therefore an important selection factor.
If the liquid becomes too hot, the achievable vacuum can decrease. Before installation, check the available water temperature, flow rate, quality, and drainage conditions. For special processes, the working liquid may also need to be selected according to the gas or process medium.

Where Can the 2BV2061 Be Used?

The 2BV2061 vacuum pump can be considered for many small industrial vacuum applications. Typical examples include vacuum drying, vacuum filtration, plastic processing, laboratory equipment, material handling, and other light industrial vacuum systems.
For example, in a small vacuum filtration system, the pump needs enough capacity to remove air from the equipment while maintaining the required pressure level. In vacuum drying, the required vacuum level and process temperature become more important because they directly affect the drying process.
The right application depends on the actual gas load, vacuum requirement, temperature, working liquid, and operating time.

Is the 2BV2061 Right for Your System?

The 2BV2061 is worth considering when you need a compact water ring vacuum pump with a 0.86 m³/min suction capacity and a limited vacuum of 1.5 mbar. Its 2 kW motor and 2880 r/min speed make it a practical option for many small-flow vacuum systems.
Still not sure which model fits your system? Start with four basic numbers: required suction capacity, required working vacuum, gas temperature, and working liquid temperature. Once these are clear, it becomes much easier to decide whether the 2BV2061 is the right choice or whether another 2BV model would be more suitable.

vacuum pump product information

Web: http://www.greentechblower.com  (Group Web)  ‖  http://www.zqblower.cn  (Chinese)  ‖ http://www.ringblower.cn/ (Ring blower)  ‖  http://www.china-blower.com  (Roots Blower)  ‖  https://www.zibovacuumpump.com(Vacuum Pump)