2BE1-203 Liquid Ring Vacuum Pump and Compressor in Refinery Off-Gas Recovery Systems

2026-11-17 13:46:35

Introduction

Refinery operations generate various types of off-gases during crude oil processing, catalytic conversion, chemical reactions, and other production activities. These gases may contain hydrogen, methane, light hydrocarbons, and other process components that can potentially be recovered and reused. Instead of directing all available gas to the flare system, refineries can incorporate dedicated gas recovery equipment to collect and process suitable gas streams.

The 2BE1-203 liquid ring vacuum pump and compressor can be considered for specific gas extraction and compression duties within appropriately engineered recovery systems. Its integration with gas-liquid separators, buffer tanks, pipelines, and downstream treatment equipment helps establish a coordinated arrangement for handling recoverable refinery gases.

Applications in Refinery Off-Gas Recovery

Refinery Off-Gas Collection

Different refinery units generate off-gas streams with varying compositions and operating conditions. These streams may originate from process vessels, separation equipment, storage facilities, and gas treatment operations.

A refinery off-gas recovery system typically includes collection pipelines, isolation valves, gas-liquid separation equipment, and pressure control devices. The 2BE1-203 can be incorporated into the extraction section when the gas inlet conditions and composition are compatible with its operating requirements.

Before entering the pump, the gas stream should pass through suitable separation equipment to remove entrained liquids and protect downstream components. The collection system should also consider pressure fluctuations and potential variations in gas composition during different production stages.

Flare Gas Recovery Systems

Flare gas recovery is an important approach to reducing the routine flaring of recoverable process gases. In a typical arrangement, suitable gas streams from refinery flare headers are collected and directed through a recovery package.

The system may include a suction separator, liquid ring vacuum pump or compressor, discharge separator, buffer tank, and downstream gas treatment equipment.

Depending on the process pressure and required discharge conditions, the 2BE1-203 can be considered for gas extraction or compression duties. Its role must be determined according to the actual operating pressure range rather than assuming that vacuum extraction and gas compression are interchangeable functions.

Recovered gas may subsequently be returned to a refinery fuel gas network or directed to other suitable treatment and utilization processes.

Integration of the 2BE1-203 into Gas Recovery Systems

Gas Separation and Buffer Tank Configuration

Gas-liquid separation is an essential part of refinery off-gas recovery. Process gases may carry condensates, hydrocarbon liquids, or other entrained substances that can affect pump operation.

A suction separator installed upstream of the 2BE1-203 helps remove liquid droplets before the gas enters the equipment. A buffer tank can also be incorporated to reduce fluctuations in gas flow and pressure.

On the discharge side, another separator may be required to separate the working liquid from the recovered gas. The separated gas can then enter downstream pipelines or treatment equipment according to the system design.

The arrangement of separators, drainage connections, and liquid circulation pipelines should be evaluated according to the characteristics of the recovered gas.

Coordination Between Vacuum Extraction and Gas Compression

Gas recovery systems may involve both vacuum extraction and subsequent compression. These functions serve different purposes and require different operating conditions.

During gas collection, a vacuum pump may be used to draw suitable gas streams into the recovery system. When the recovered gas needs to be delivered to a higher-pressure network, a compressor may be required.

The 2BE1-203 can be evaluated for the appropriate extraction or compression stage according to its specific configuration and performance characteristics. Engineers should distinguish between these duties when designing the overall system.

The integration of pressure monitoring instruments, control valves, and buffer equipment helps coordinate gas flow between the different process sections.

Key Considerations for Equipment Configuration

Gas Composition and Working Liquid Compatibility

Refinery off-gas composition can vary considerably depending on its source. Hydrogen, methane, light hydrocarbons, water vapor, and other components may be present in different proportions.

Before selecting a liquid ring vacuum pump or compressor, engineers should evaluate the gas composition, temperature, inlet pressure, and potential chemical interactions with the working liquid and equipment materials.

Working liquid compatibility is particularly important when handling hydrocarbon-containing gases. The selected liquid should be suitable for the process environment and should not introduce unwanted reactions or contamination.

A closed-loop working liquid arrangement may also be considered where appropriate, particularly when the process requires controlled liquid management.

Sealing and Leakage Monitoring

Gas leakage prevention is a major consideration in refinery recovery systems. Equipment connections, shaft sealing arrangements, pipeline joints, and valve interfaces should be designed to minimize the possibility of gas escaping into the surrounding environment.

Appropriate sealing materials should be selected according to the gas composition and operating conditions. Gas detectors and pressure monitoring instruments can be incorporated into the system to support operational safety.

For installations handling flammable gases, electrical equipment, motors, instruments, and control components must comply with the applicable hazardous-area classification and explosion-protection requirements.

Pressure Control and Continuous Operation

Refinery gas recovery systems often operate under changing process conditions. Gas production rates may fluctuate as upstream units change their operating states.

A suitable control arrangement should coordinate pump operation, inlet pressure, discharge pressure, separator liquid levels, and downstream gas delivery.

For systems using multiple extraction or compression units, automatic sequencing and standby arrangements can help maintain equipment availability. Regular inspection of separators, seals, working liquid circuits, and instrumentation also supports reliable operation.

Conclusion

The 2BE1-203 liquid ring vacuum pump and compressor can be considered for suitable gas extraction and compression duties in refinery off-gas recovery systems. Its integration with collection pipelines, gas-liquid separators, buffer tanks, and downstream treatment equipment provides a practical framework for recovering and handling process gases.

Successful system configuration depends on understanding the gas composition, distinguishing between vacuum extraction and compression requirements, selecting compatible working liquids and sealing materials, and implementing appropriate pressure and safety controls.

By considering these factors during system engineering, refinery operators can develop gas recovery arrangements that support process gas reuse, improve resource utilization, and reduce the amount of recoverable gas directed to routine flaring.

 2be1_vacuum_pump_800x800_3.jpg


vacuum pump  product   information

Web: http://www.greentechblower.com  (Group Web)  ‖  http://www.zqblower.cn  (Chinese)  ‖ http://www.ringblower.cn/ (Ring blower)  ‖  http://www.china-blower.com  (Roots Blower)  ‖  https://www.zibovacuumpump.com(Vacuum Pump)