MF-10 Particulate Filter – an example of industrial aesthetics in a maintenance-free design

Breaking through the technical paradox of traditional filtration devices of "high efficiency is high consumption", MF-10 adopts aerospace-grade stainless steel filter to achieve the perfect balance between ventilation and filtration through the arrangement of 120 mesh diamond-shaped mesh. Its innovative self-cleaning structure only needs to blow back with 0.3MPa compressed air for 5 seconds per month to restore the initial filtration efficiency, truly achieving "zero consumables" operation. The modular design supports a single person to complete the disassembly and assembly in 10 minutes, and the threaded interface adopts CNC engraving technology, with a surface roughness of Ra≤0.8μm to ensure seamless connection with the equipment.

According to actual measurement, under the air volume of 20,000m³/h, the pressure drop only increases by 8Pa, which is 22% more energy-saving than similar products. From grain storage to electronics workshops, from pharmaceutical purification to cement conveying, MF-10 is redefining industrial filtration standards as an "invisible champion".

Maintenance Tips:

Daily inspection: Observe the dust accumulation of the filter with an endoscope every quarter

Deep cleaning: disassemble and treat stubborn stains with an ultrasonic cleaner every year

Life warning: It is recommended to replace when the pressure difference exceeds 50% of the initial value

Safety Tips: Always cut off the power supply and hang warning signs before cleaning

Filler breather filters product information