Wechat / Whatsapp:+86 13869171699
Español
pусский
Chinese
    News
    Requirements for on-site installation of roots blower
    Requirements for on-site installation of roots blower
    2025-03-04
    1. Installation siteThere should be a safe passage position no less than 1.5-2 meters around the fan. The operating ambient temperature of the fan shall not exceed 40 degrees Celsius. When the fan is installed indoors, it should ensure that the machine room has sufficient lighting, dry air and good
    Blower applications
    Blower applications
    2025-03-04
    The function of the blower is to evenly enter the impeller through the air intake chamber, and after the centrifugal force and the diffuser effect in the impeller in the rotating blades, the gas obtains pressure energy and speed energy, and the gas flowing out of the impeller at high speed is conver
    Performance characteristics of roots pumps
    Performance characteristics of roots pumps
    2025-03-03
    Fast start, less power consumption, low operation and maintenance costs, large pumping speed, high efficiency, insensitive to a small amount of water vapor and dust contained in the pumped gas, large pumping rate in the pressure range of 100~1 Pa, can quickly eliminate the sudden release of gas. Thi
    The use and operation of the blower
    The use and operation of the blower
    2025-03-03
    (1) Check the lubricating oil level of the oil tank, which should be between the upper and lower limits of the oil dipstick(2) Notify the substation to supply power to the machine(3) Check the control cabinet on the machine, there should be no alarm display, if there is an alarm, find out the cause
    Common faults of roots pumps
    Common faults of roots pumps
    2025-02-28
    1. The starting pressure of the roots pump is too high, which causes the parts of the pump to overheat and be damaged (some mechanical booster pumps can also be started under atmospheric pressure after special design).2. The large abrasive particles generated in the production process enter the root
    Roots pump maintenance method
    Roots pump maintenance method
    2025-02-28
    (1) Roots vacuum pump regular inspection:1. Daily inspection:1) Oil level check: too much oil will increase the temperature, and too little oil will cause poor lubrication.2) Temperature check: Check the temperature of each part of the pump with a thermometer.3) Motor load check: measure the motor l
    Blower product classification
    Blower product classification
    2025-02-27
    1.Roots blowerThe roots blower is a positive displacement blower, which is a kind of rotary blower, which uses two or three lobe rotors to move relative to each other in the cylinder to transport gas. Due to the continuous rotation of the rotor, the pumped gas is sucked from the air inlet to the air
    The role of the blower
    The role of the blower
    2025-02-27
    he air is inhaled, compressed, and spit out through the eccentric rotor, which is used in industrial production such as pressurization, ventilation, ventilation, and material transportation; Discharge polluted gases, introduce fresh air, and improve air quality; Reduce the ambient temperature in a h
    ···910111213···

    Quick Links

    Product

    Greentech International (Zhangqiu) Co., Ltd.

    Greentech Industry (Jinan) Co., Ltd.

    CONTACT US

    Call Us

    +86-531-83117088

    E-mail: greentech@vip.163.com

    Address:Mingshui Economic Development Zone, Zhangqiu, Jinan City, Shandong, China

    Skype: guanglin_jiang

    Copyright © 2020  Greentech International (Zhangqiu) Co., Ltd.  | All Rights Reserved 鲁ICP备12007127号 Technical support:Xintuweb